Hull Wax by Flag®, UK 15 oz

$16.10

Hull Wax by Flag®, UK 15 oz

Description

Located on the UK’s south east coast, north of the white cliffs of Dover, Flag®“Trademarked property, and any rights therein, is the property of the respective owner and not the property of Roger Edwards. In reselling these trademarked products through this website, Roger Edwards assert no ownership or rights in the trademark or intellectual property sold or listed on this website”. Paints of the UK has been a specialist in the making of marine paints and coatings since World War II. Lustersheen®“Trademarked property, and any rights therein, is the property of the respective owner and not the property of Roger Edwards. In reselling these trademarked products through this website, Roger Edwards assert no ownership or rights in the trademark or intellectual property sold or listed on this website”. is honored to import these time honored products such as Flag Hull Wax.

Hull Wax is a high volume solids wax specifically engineered to seal and protect all above water surfaces from UV and salt water degradation. This product will restore shine to a vessels topsides and all areas above the waterline.

Hull Wax is designed for a boats topside, it helps seal the microscopic pores in the boats gel-coat caused by UV damage. Hull Wax makes the boat’s various above water substrates much easier to clean and resistant to staining.

Hull Wax should not be used below the waterline as it will stop the adhesion of paint systems and if applied over anti fouling, will effectively block the chemical interface between the paint and the seawater.

15 Oz Size

Specifications:

Color: Clear
Gloss Level: High Gloss
Volume solids: 26 – 28%
Theoretical spreading rate: 30 – 50 sq. ft. per lb
Flash point: 42ºC
Specific gravity: 0.78
Dry to touch : About 5 minutes after application
Over-coating time : NA
Application Method:

Apply with a soft lint-free cloth, working into and on to the surface thoroughly, leaving behind a thin film of wax polish.
Buffing can begin within 30 minutes of application or longer.
A higher shine and better take of the wax will occur if buffing and burnishing are started after letting the polish set for an hour or more, even as long as overnight. This allows time for the solvent to thoroughly evaporate off.
For a higher shine apply a second application, allowing the polish to set a couple hours before buffing off.
For ease of buffing use the Burnisher aka Pine Brush.
Clean tools using Mineral Spirits.

Additional information

Weight1 lbs

Reviews

There are no reviews yet.

Be the first to review “Hull Wax by Flag®, UK 15 oz”

Your email address will not be published. Required fields are marked *